|
|
 |
|
|
|
 |
| 8400 Hydrostatic Triplex Mower |
We put new hydrostatic power into the National 8400 which makes it even better on slopes. The 8400 also makes tough mowing jobs easier by adding power steering and a more comfortable ride. We also designed it to give you a better cut. Independent Reel and Ground Speeds.
Hydrostatic drive provides independent reel and ground speeds for the finest reel cut of any mower in the industry. You get the same perfect cut at any speed, whether you slow down to trim or speed up for the more open areas. |
|
 |
Hydrostatic Drive to Wheels |
Easier operation and less operator fatigue |
Seat Position |
Lowered seat 3" giving lower center of gravity and greater stability on slopes |
Power Front Steering |
Highly maneuverable, tighter turning, less operator fatigue |
Independent Ground and Reel Speed |
Fast or slow, reel speed not affected by ground speed for best reel cut. |
Electric Reel Clutch |
Single switch turns all three reels on and off |
Engine Hood Fender |
Fenders keep operator cleaner, hood makes for quieter operation |
New Controls |
You drive this machine, it doesn't drive you |
Reel Overhang |
Large reel overhang makes for better trimming capabilities |
4 wheels |
Allows this mower to go most anywhere. If you can walk up a hill without using your hands, this National will mow it |
Light Weight, 16hp |
Comes in under ROPS specifications |
TRACTOR |
|
Engine: |
Briggs & Stratton Vanguard 16 hp twin cylinder, electric start, ducted air flow |
Transmission: |
Eaton Model 11 variable displacement hydrostatic pump. |
Drive Motor: |
Eaton T series geroler hydraulic motor, coupled to differential input shaft |
Steering: |
Eaton Power Steering |
Wheel Motors: |
Charr-Lynn low-speed, high-torque 2000 series |
Oil Tank: |
5 gallons |
Gas Tank: |
5 gallons |
Frame: |
Welded tubular steel construction |
Mowing Speed: |
0-7 mph |
Transport Speed: |
7 mph |
Reverse Speed: |
3 mph approx. |
Tires: |
Full pneumatic, front, 16/650 x 8, rears, 8 x 12 |
Weight: |
1050 Ibs. |
Controls: |
Foot operated traction pedal for forward & reverse, hand operated throttle & choke controls, free wheeling tow valve, electric clutch for cutting units, hand operated parking brake |
MOWERS |
|
Cutting Units: |
Three 30" power driven units free floating to follow ground contours |
Reel: |
8" diameter, 6 or 8 blade alloy blades, 30" long |
Reel Bearings: |
Timken tapered roller bearings on reel shaft, adjustable |
Bed Knife: |
13/64" x 2" with upturned lip of alloy steel |
Width of Cut: |
84" |
HOC: |
5/8" to 2 1/4" Reel to Bed Knife adjustment, spring loaded. Auto/spring loaded belt tensioning |
Capacity: |
3 1/2 Acres per hour |
Options: |
Rear roller scrapers, anti scalp front rollers, rubber covered rollers, ATV tires |
|
|
|
